ENERGY SISTEM LED TV3010, Руководство пользователя

Страница: 26 / 30

61
EN
G
LI
S
H
8. pVR fUNCTION
1. In TV or Radio playing mode, press PVR to open REC selection window, and
select “YES” to begin recording.
While recording, press PVR to open REC selection window again, and select
“YES” to exit.
Note: REC files can only be saved in the memory of an external USB device
2. In desktop of Disk Manager, press
▲▼
to select a file in the list of files. Press
ENTER to play the selected file.
3. In desktop of Disk Manager, press the green button of the remote control to
switch between operations of PLAY/Delete One/Delete all. After pressing ENTER
to select one operation, a new dialog box appears. Select “YES” to confirm or
“NO” to cancel.
The programs recorded from TV can be played in Movie function. You will find
the file in PVR folder, which contains all the recordings done. The programs
recorded from Radio can be played in Music function.
9. TROUBLeSHOOTING
If you experience problems with this receiver or its installation, in the first instance
please read carefully the relevant sections of this User Manual and this
Troubleshooting section.
Problem Possible cause Solution
The LED does not
light up / not lit
when the device is
connected to the
mains.
Mains cable is not connected
Check that the mains cable is
plugged into the power socket
The battery isn’t installed or
needs to be recharged
Make sure the battery is installed
properly and charged
The remote control is
not working
Battery exhausted Charge battery
Remote control is incorrectly
aimed
Aim the remote control to the TV.
Check that nothing blocks the front
panel
Doesn’t display the
subtitle
The program signals no subtitle
date
Try pressing the SUB button to open
the subtitle
The subtitle doesn’t open or
signal is too weak
Make sure the signal is good