ENERGY SISTEM Energy Phone Max 3+, Руководство пользователя

Страница: 4 / 19

Rear flash 4.
Proximity and luminosity sensors 5.
Earphones 6.
Notification LED 7.
Front camera 8.
9.
Volume - 10.
Power button 11.
Microphone 12.
MicroUSB port 13.
Touch buttons: Recent Apps, Home, Back 14.
Fingerprint sensor 15.
Speaker 16.
Card eject tool 17.
Earphones
18.
Multifunction button 19.
Volume - 20.
MicroUSB port 21.
LED indicator 22.
Microphone 23.
<
Charging the device
Your Energy Phone Max 3+ features a rechargeable built-in battery. The charging time ranges from 2 to 3 hours,
depending on whether the device is on or off. The device features Quick charge technology to charge the battery
to 60% in less than an hour. Always charge your phone through the USB cable and the power adapter that come
with the product to comply with the battery charging times.
Your Energy Earphones 1 Bluetooth feature a rechargeable built-in battery. The charging process takes
approximately an hour and a half. When the battery level is low, you will hear a warning sound and the LED
indicator (22) will flash red. Connect the charging cable to the microUSB port (21). The LED indicator (22) will
glow red while charging the battery and will turn blue once the battery is fully charged.
Switching the device on and off
Please verify that the nano/microSIM/microSD cards are correctly inserted in their corresponding slots as
explained in the "How to insert the microSIM 1/nanoSIM 2/microSD cards" section before turning on your
Energy Phone Max 3+. Press the power button (11) located on the right side of your device for one second.
Once the operating system has loaded completely, please unlock the device to start using it. Proceed to enter the
PIN number of your SIM cards and then drag your finger upwards on the main screen.
Press and hold the power button (11) until the power off menu appears on screen and then select "Switch off" to
turn off your Energy Phone Max 3+. Briefly press the power button (11) to lock/unlock the device thus, turning
the screen off/on. You can also unlock the device using the fingerprint sensor (15) once you have set it up
(please refer to the "Fingerprint sensor" section).
Press and hold the multifunction button (19) for 2 seconds to switch on your Energy Earphones 1 Bluetooth.
The LED indicator (22) will glow blue and you will hear a confirmation sound. Press and hold the multifunction
button (19) for 3 seconds to switch them off. The LED indicator (22) will glow red for 2 seconds and you will
hear a confirmation sound.
https://www.energysistem.com/en/guide/42909
4 sur 19 25/09/17 09:36