User manual Cinne™ 3000. Ref: 201104
6/7
Operation instructions
1. Stereo / 5.1 Mode Selection
For stereo mode, please connect the sound source with Front L and Front R input terminal.
This unit is AC-3 and DTS compatible. For 5.1 sound effect, please connect it with 5.1 input terminals.
2. Power on
Front panel operation
Press the Power button and once LED light flickers, this product is connected with power.
3. Master and Woofer Volume adjust
Remote control operation
ü
Press button of “Master
” or “Master
” to increase or decrease the volume of whole speaker
system.
ü
Press button of “Woofer
” or “Woofer
” to increase or decrease the volume of woofer speaker
system.
4. Power off
Front Panel Operation
Press the Power button again and once LED light diminishes, this product is disconnected from power.
Trouble Shooting
Problem
Cause
Solution
No Sound
ü
Improper connection of speaker
terminal.
ü
Improper connection of sound
frequency terminal.
ü
Improper connection of AC plug and
the socket.
ü
Volume is too low.
ü
The speaker terminal is
short-circuited
ü
Ensure that the equipment is
connected properly.
ü
Ensure that the sound
frequency is connected properly.
ü
Insert the AC plug securely into the
AC outlet.
ü
Increase the volume with
volume controlling button.
ü
Cut off power, reconnect the speaker,
then start the power again.
Sound distortion
ü
Improper connection of amplifier input
terminal.
ü
The volume is too high.
ü
Ensure that the input terminal is
connected properly.
ü
Lower the volume with volume
controlling button.
Sound only from
one chanel
ü
Improper connection of amplifier
input terminal
ü
Input level is too high
ü
Ensure that the input terminal is
connected propely
ü
Adjust the woofer and master
volume properly
Remote control
fails to work
ü
The battery has gone off.
ü
Interference by strong and direct
sunlight.
ü
Obstacle in front of the sensor
ü
Replace with new batteries.
ü
Keep the sensor away from sunlight.
ü
Remove the obstacle.