Energy Eye IR-05 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 9

Energy Eye IR-05 Скачать руководство пользователя страница 9

10. Once the sensor has been learned in and the proper jumper settings have been

selected it will be necessary to attach the sensor to the base plate which you

should have already mounted to the ceiling. Simply line up the two mounting points
and turn counter clockwise to mount the sensor (see following picture).

11. The sensor is now ready for use! Proceed to Section 7.0

Installation Step 7 –

Testing and Operation on page 42 of the Energy Eye Installation and Operations
Manual to complete the installation of your Energy Eye System.

Contact Information for Energy Eye



:

Energy Eye, Inc.
9833 Pacific Heights Blvd.
Suite H

San Diego, CA 92121 USA

Toll Free. 1 866 463 3135

Ph.

01 858 202 0001

Fax.

01 858 202 0008

Web.

www.energy-eye.com

Email:

[email protected]

NOTES:____________________________________________________

___________________________________________________________

___________________________________________________________

___________________________________________________________

___________________________________________________________

___________________________________________________________

___________________________________________________________

___________________________________________________________
___________________________________________________________
___________________________________________________________

Energy Eye



is a Registered Trademark and Energy Eye



is a trademark of Energy Eye, Inc.

©2006 Energy Eye, Inc. – All Rights Reserved –

«
...
7
8
9

Содержание IR-05










Отзывы:

Нет отзывов