Energizer eZV3200, Руководство пользователя

Страница: 36 / 48

28
b. Turn the fuel switch to OPEN, and loosen the carburetor drain bolt to discharge
all gasoline from inside of the carburetor.
c. Take off the spark plug cap, revolve the engine three or four times by pulling on
the recoil start, discharge the gasoline from the fuel lines.
d. Turn the fuel switch to CLOSED, and tighten the drain bolt of carburetor.
e. Reinstall the spark plug cap.
3) Change new oil while engine is still warm from operation.
4) Remove the spark plug, and pour a tablespoon of clean engine oil (10~20ml)
into the cylinder. Revolve the engine several times by pulling on the recoil start to
distribute the oil. Reinstall the spark plug.
5) Pull the starter grip slowly until you feel resistance. At this point, the piston is
coming up on its compression stroke and both the intake and exhaust valves are
closed. This position helps to protect the engine from internal corrosion.