Energie INVERTER 4/12, Инструкция по установке и эксплуатации

Страница: 23 / 65

ENERGIE Page | 21
The thermostat cannot be installed:

in exterior walls.

near the radiators, convectors, etc.

behind or near the doors.

near to the windows.
WARNING: The room thermostat contact (ON / OFF ) must be free of
tension. Connecting a tension on this contact will cause destruction of the
controller.
15.12 Electrical wiring
Model Power source Max. current
* Power source cable
section
Inverter 220/240V~ /50Hz 16 A 2,5mm²
* The above wire sizes are selected at the maximum current of the unit
according to the European Standard EN60335-1 and considering a cable
length of 10 meters.
NOTE: Follow local codes and regulations when selecting field wires, circuit
breakers and earth leakage breakers.
Select the main switches according to the next table:
Model Power source
Max.
current
CB
ELB
(no. poles/A/mA)
Inverter 220/240V~ /50Hz 16 A 25 A 2/25/30
CB
– Circuit breaker; ELB – Earth leakage breaker.
15.13 Water circulator
Mode selector