User Manual
>> ser
vic
e
>> 010
Service
Troubleshooting
Computer display is not working
• .The .computer .might .not .be .getting .power . .Check .if .the .batteries .are .
inserted .properly .
• .The .batteries .might .need .to .be .replaced .
• .Contact .your .local .ENERGETICS-dealer .if .you .have .checked .all .connections .
and .the .display .is .still .not .working .
The computer does not show values during the workout
• .Check .if .the .data .cable .is .connected .properly .
Heart rate (PULSE) shows no or incorrect read out
• .Check .if .your .palms .have .proper .contact .with .the .sensors . .Both .palms .have .
to .be .in .contact .with .the .sensors .simultaneously . .The .display .may .be .on .a .
slight .delay .
• .Check .all .cable .connections .
• .Try .moistening .your .hands .if .they .are .dry .
The computer has shut down
In .rare .cases .the .computer .might .shut .down, .mainly .because .of .sudden .
changes .in .the .electrical .current .or .static .discharge . .Normally .the .E-101 .
restarts .on .its .own .
If .this .should .not .occur .a .restart .can .be .performed .by .removing .the .batteries .
for .a .moment .and .reinserting .them .
Care
Take .care .that .to .avoid .any .moisture .penetration . .Clean .the .computer .with .a .
lightly .dampened .cloth . .Do .not .use .abrasive .cleaning .solutions . .
Maintenance
There .is .no .need .for .special .maintenance . .Regularly .check .that .all .bolts .and .
connections .have .a .tight .fit . .Exchange .any .defective .parts .immediately . .For .
assistance .contact .your .local .ENERGETICS-dealer .