ON/OFF Switch
Each lamp has an on/off switch. Press the switch toward the “ | ” symbol to turn the lamp
on. Press the switch toward the “O” symbol to turn the lamp off. Always turn the work light
off before unplugging.
Adjusting the light direction
1. Adjust vertically by loosening the two vertical adjustment knobs (D) on each side of the
metal bracket located below the lamp head. Adjust the lamp head to the desired position
using the handle and retighten both knobs.
2. Adjust horizontally by loosening the lower twist knob on the metal bracket located below
the lamp head. Adjust the lamp head to the desired position using the handle and retighten
knob.
5
Your portable LED work light requires very little care and maintenance. Simply clean the lens,
lamp head and lamp stand regularly with a non-abrasive cleaner.
Warning: Always make sure the work light is unplugged and completely cool before
attempting to clean it.
OPERATING INSTRUCTIONS
Printed in China
www.energeticlighting.com
CARE AND MAINTENANCE
TROUBLESHOOTING
Problem
Possible Solution
Corrective Action
The work light comes on,
but the lights are
dimmed.
Improper voltage or power
supply. Use of an extension
cord longer than 49 in. can
reduce the voltage supplied
to the light and can cause
dimming. Use 14-gauge
(AWG) extension cord with a
cord length of less than 49
in.
The work light will only oper-
ate on standard household
120 V AC/60 Hz power. Have
power supply checked by a
qualified electrician.
WARRANTY
This fixture is warranted to perform free from defects for five years. If it fails to do so, you may
return it with proof of purchase to 13445 12th St., Chino, CA 91710 for replacement.