To avoid electrical shock, do not use near water or in areas where water may accumulate.
Keep work light at least 16 ft. from pools or spas. Keep plugs dry. Use only Ground Fault
Circuit Interrupter (GFCI) protected receptacles when using this work light in wet or damp
locations. Receptacles are available with built-in GFCI protection and are to be used for this
measure of safety.
Always unplug work light and allow lamp head to cool.
Do not look directly at the lighted lamps to avoid eye injuries.
Always keep the work light away from any flammable materials.
Do not operate work light if it has a missing or damaged lens cover. Contact customer
service for a replacement. Read and follow all safety rules and operating instructions before
first use of this product.
-
-
-
-
-
4
www.energeticlighting.com
5
www.energeticlighting.com
AA
CC
SAFETY INFORMATION
INSTALLATION INSTRUCTIONS
OPERATING INSTRUCTIONS
B
B
C
Tripod Height Adjustment
The tripod height can be adjusted by releasing
the Height Extension Locks (E) and extending
the tripod to the desired height, then locking the
Height Extension Locks.
2
Tripod Leg Extension
To extend the Tripod legs, press the Tripod Leg
Lock Release Button (DD) and pull the Collar
Assembly (EE) down until the legs lock in place at
the bottom of the Tripod stand.
To return the legs to the folded position for
storage, press the Tripod Leg Lock Release
Button (DD) and pull the Collar Assembly (EE)
back up to the top.
Attaching and Releasing Light Head
on Tripod
a) To attach the Light Fixture with stand, align the
Lock Pin (FF) over the mounting hole of the
Tripod (D), push down firmly until the Light Fixture
clicks into place.
b) To release the Light Fixture and stand, squeeze
the Light Head Release Knobs (FF) together while
pulling the Light Fixture up and away from the
Tripod (D).
1
3
1. Attach the handle bar (C) to the stand (B) using two
handle bar screws (AA).
1
2. Install the two light fixture heads (A) to stand (B) using
the two light head screws (CC). Attach the junction
box to the handle bar using junction box screw (BB).
2
BB
A
E
DD
FF
EE
D