English
31
4.2 Primary air
The control of the primary air supply takes
place via the control unit on the left. The
primary air supply is completely open when
the control unit is pushed back completely.
4.3 Secondary air
The control of the secondary air supply takes
place via the control unit on the right. The
primary air supply is completely open when
the control unit is pushed back completely.
4.4 Commissioning
The steel parts of the Bullerjan
dot
®
are
coated with Senotherm
®
paint which hardens
during the initial preheating phase. This
process produces vapours and odour.
During the initial preheating phase
(to avoid potential health hazards), no one
should be in the place of setup. This space
must be well-ventilated in order to enable
the vapours and odour to dissipate. Ensure
that all fixture components have been
removed from the combustion chamber.
4.5 Preheating phase
Set the control unit for the primary air
supply (as well as the one for the secondary
air supply) to the maximum open position.
Lay the kindling used for starting the fire
on the grate and place the Bullerjan
®
igniter
between the pieces of kindling. Then, place
split wooden logs on top of the kindling.
Please ensure that you do not exceed the
permissible fuel quantity (see p. 32).
Ignite the Bullerjan
®
igniter and close the
combustion chamber door. After the split
wooden logs have completely caught fire,
the primary and secondary air supply can
be reduced. In this process, ensure that
you never completely shut off the primary
air supply.
Bullerjan_dot_0101.indd 31
17.09.2010 15:51:43 Uhr
Содержание Bullerjan dot
Страница 3: ...1 2 3 4 5 6 7 8 9 10 11 12 Umschlag_0101 indd 2 17 09 2010 14 52 17 Uhr ...
Страница 8: ...Deutsch 5 Bullerjan_dot_0101 indd 5 17 09 2010 15 51 36 Uhr ...
Страница 17: ...14 Primärluft Regler Sekundärluft Regler Bullerjan_dot_0101 indd 14 17 09 2010 15 51 38 Uhr ...
Страница 88: ...84 Bullerjan_dot_0101 indd 84 17 09 2010 15 51 55 Uhr ...