2000W HEAT GUN ENB467HTG
Operating instructions
1. NOZZLES
The kit is supplied with 4 different shaped nozzles,
which can be used as follows:
1. Concentration nozzle (See Fig.1)
This nozzle directs a concentrated heat flow to the
workpiece. It is ideal for use when removing paint in
awkward corners, crevices, moulding, beading, architraves
or whenever precise paint removal is required.
2. flat nozzle (See Fig.2)
This nozzle directs a long narrow heat pattern to the
workpiece, and is ideal for removing paint or varnish from
large flat surfaces such as skirting boards, doors, stairs etc.
It should be used in conjunction with a flat scraper. Vinyl
tiles can be removed by softening the tile and adhesive.
3. glass protection nozzle (See Fig.3)
This nozzle deflects the heat away from glass or other
fragile areas and back onto the workpiece.
4. Hook nozzle (See Fig.4)
This nozzle disperses the heat flow evenly around the whole
workpiece. It is ideal for defrosting frozen pipes, soldering
pipe work, bending plastics and heat-shrinking electrical
parts.
To connect the nozzle to the machine, just
push the nozzle
firmly over the nozzle on the tool.
Attention:
Don’t touch the nozzle, and always use the gloves!
2. SWITCHING ON/Off(Fig.5)
Switching on:
To put into operation, slide the switch to position 1,2 .
Switching off:
To switch off, slide the on/off switch to the stop at position 0.
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5