C. Charging Cell Phone, Tablet and USB device
Instruc�on:
01.
02.
03.
Plug the USB charging cable to USB 5V/2.4A output port.
Select appropriate connector for your USB device and connect it. Power Jumper
can iden�fy and charge the device automa�cally.
Click “Func�on Bu�on” once, press and hold for 3 seconds to turn on power
jumper and start charging, then the LED display will be on when the device is
charging.
07.
08.
09.
Start the vehicle. Do not crank the igni�on more than 3 seconds. If vehicle
doesn’t start, wait about 1 minute and try again. If engine dose not start a�er
second a�empt, discon�nue cranking and consult a professional.
A�er the engine starts, please remove the jump clamp from the ba�ery.
Store the Power Jumper in a cool, dry environment, away from flammable
material. Remember to re-charge Power Jumper every three months.
①
②
③
④
⑤
Enforce Bu�on
LED
A�er connec�ng the jump clamps, check the LED indicator:
Green:
Power jumper is ready to jump start your vehicle.
No Light:
Press the "Enforce Bu�on". Then start your vehicle within 30 seconds.
No Light with Beep Sound:
Please reverse the jump clamps connec�on.
