Enerdrive ePRO Combi, Руководство пользователя

Страница: 21 / 24

Page 21 Enerdrive ePRO COMBI Owners Manual
7. TECHNICAL SPECIFICATIONS
Model 12V 1600VA 60AMP 24V 1800VA 35AMP
Inverter stage
Output power
1)
Pnom 1300VA 1400VA
P10minutes 1600VA 1800VA
Psurge 2500VA 3000VA
Output voltage / frequency 230VAC ± 2% / 50Hz ± 0.05%
Output waveform True sinewave (THD < 5%
1)
) @ Pnom)
Input voltage (± 3% tolerance): Nominal 12V 24V
Range 10.5 2) – 16VDC 21 2) – 32VDC
Maximum efficiency 92% 94%
No load power consumption 3) [ASB] < 10W [2.0W] < 12W [2.0W]
Charger stage
AC input voltage 185 – 270VAC / 45 – 65Hz / PF > 0.95
Maximum continuous charging current4) 60A 35A
Standard charge voltage (bulk / float @ 25°C) 14.3V / 13.3V 28.6V / 26.6V
Charge algorithm or program IUoUoP, intelligent 4 stage, temp. comp.
AC Transfer switch
Maximum continuous current 16Arms
Transfer time (typical)
0ms (inv.
g
mains) / < 5ms (mains
g
inv.)
General
ePRO Link enabled Yes
Protections high/low battery voltage, high temperature, overload,
short circuit, high ripple voltage and low AC input voltage
DC connections Two wires, length 1.5 meters, 35mm
2)
AC connections Screw terminals
Enclosure body size 351 x 210 x 114mm
Total weight 10.7kg
Protection class / Op. temp. / Storage temp. IP21 / -20°C .. +50°C / -40°C .. +80°C
Standards Complies with IEC 60335-2-29 including Australian
deviations.
Note : the given specifications are subject to change without notice.
1) Measured with resistive load. Power ratings are subject to a tolerance of 10% and are decreasing as temperature rises with a rate of approx. 1.2%/°C starting from 25°C.
2) Undervoltage limit is dynamic. This limit decreases with increasing load to compensate the voltage drop across cables and connections.
3) Measured at nominal input voltage and 25°C
4) At higher ambient temperatures, maximum output current shall be reduced automatically