Enerdrive EPL-100BT-12V, Руководство пользователя, Страница: 16 / 20

Enerdrive ePOWER B-Tec Lithium Battery- Owners Manual (Rev. 3.01) Page 16
this warranty will be repaired/replaced free of charge if, at the sole discretion of Enerdrive, adjustment
is necessary due to defect in material or workmanship. Batteries for warranty repair/replacement
consideration are to be returned to the original supplying distributor/dealer.
Batteries replaced under the warranty provisions will be shipped with a replacement warranty sticker
and carry only the remainder of the original Applicable Warranty Period.
The battery is not designed or warranted in the following areas:
• The battery is not designed to parallel connect extra batteries to increase the overall capacity
• The battery is not designed to series connect extra batteries to increase the overall voltage
• The battery in not designed for Under bonnet applications or areas of high temperature >45°c
• The battery is NOT to be used for cranking or starting applications.
• The 100Ah & 125Ah battery is NOT to be used with an inverter greater than 1000W
• The 200Ah battery is NOT to be used with an inverter greater than 2000W
• The Battery is NOT to be used in any Aviation aircraft application.
• The Battery is NOT to be used in any lifesaving applications
• The Battery is NOT to be exported to USA/Canada and their territories
• Any residential system sold with the intent or purpose of a “Tariff Adjustment Program” of any type.
PLEASE NOTE: The battery has a self-discharge rate of 3% per month @ 25°C. The battery should not
be left for more than 30 days without checking its charge state. Enerdrive recommend that a battery
left in a “storage state” should be checked and charged when the battery capacity is low (≤15% SOC),
or the voltage measures ≤11.50V to maintain maximum life expectancy of the battery. Failure to follow
these requirements will see an early failure of the battery which is not covered under warranty.