Eneo VTD-1 Скачать руководство пользователя страница 8

5.0 Keyboard setup 

 

- 8 - 

Operating Instructions Text Display 

 

   

 

 

 

 

 

5.0  Setup-Configuration v ia PS/2 keyboard 

 
For the setup configuration a customary PS/2 keyboard is connected to the text 
display. The keyboard can be plugged on while the TD operates.  
 
By pressing the 

F1-

key you can call up the setup menu and the unit switch over in a 

internal mode (white characters on a dark background). 
The main menu with the following submenu appears:  

§ 

Date / Time – Configuration of positional 
parameters and clock setting 

• 

Text Edit – Free positioning and entry of 
on screen texts 

• 

Timer / Keyboard / Zoom  - Definition of  
relay time-out and  insert time by 
protocol data, keyboard layout and 
modify of character size 

• 

RS232-Parameters 

- Definition of 

interface parameters 

• 

Setup End  - Setup termination and ini-
tialisation with the new setup parameters 

 
You can call  up the respective submenu with the keys 

1...4.

 With the key 

ESC

 you 

leave the main menu.  
 
By pressing a numeric button the corresponding submenu appears. 
  
An arrow identify the current entry field.  By pressing the arrow keys   ‘

’ and ‘

’ you 

can skip between the edit field of the parameter. All parameters will be changed 
directly with the character and numeric keys or by using the arrow keys ‘

‘ and ‘

‘. 

 
With the entry of 

ESC

 you leave each submenu and the main menu appears anew. 

 

Содержание VTD-1



















Отзывы: