49
Camera
Camera allows you to select which camera inputs to be adjusted.
Use the following steps to change the camera number to be set:
Step
Action
1
Press or to move the cursor to Camera.
2
Press or to select the camera title to be adjusted.
3
Press MENU to go to the previous OSD window.
Capture Time
Capture Time is the interval that the motion detection is processed.
It also affects to the POP window.
When it is set to 5 SEC, the motion detected camera picture will be moved vertically every five seconds.
It supports up to 99 seconds.
Use the following steps to set the Capture Time:
Motion Enable
To enable motion detection of the selected camera, select „ON”
Step
Action
1
Press or to move the cursor to Motion Enable.
2
Press or to select „ON” or „OFF”.
• ON:
Motion Detection of the selected camera is enabled.
• OFF:
Motion Detection of the selected camera is disabled.
3
Press MENU to go to the previous OSD window.
Sensitivity
Use the Sensitivity to adjust the sensitivity of motion detection.
To increase (decrease) the sensitivity of the specific camera, increase (decrease) the sensitivity value.
Use the following steps to set the sensitivity:
Step
Action
1
Press or to move the cursor to Sensitivity.
2
Press ( ) to decrease (increase) the sensitivity value.
3
Press MENU to go to the previous OSD window.
Step
Action
1
Press or to move the cursor to Capture Time.
2
Press ( ) to decrease (increase) the Capture Time.
3
Press MENU to go to the previous OSD window.
Beep Time
The Beep Time function is same as the Alarm Input function in action except for events that make function.
