5
7.13 CAMERA ID Menu
Up to 40 characters can be input for camera ID.
To enter
CAMERA ID
menu, press button at
MAIN menu-2 > CAMERA ID.
Use , , , buttons to move a block cursor in character table and press button to input the selected
character.
To move the character input position on CAMERA ID input line, move a cursor to <– –> on COMMAND LINE and
press button on <– or –> .
To clear CAMERA ID input line, move a cursor to CLR on COMMAND LINE and press button.
To set the location of CAM TITLE to be displayed on the monitor, move a cursor to POS and press button and then
menu disappears and CAMERA ID will be displayed on the monitor.
Move CAMERA ID by using , , , buttons and press button to fix.
Menu will appear again.
To finish CAMERA ID menu, press button on RET on command line.
7.14 CAMERA RESET
To load Factory defaults, move the cursor to
MAIN Menu-2 > CAMERA RESET
and press button.
To save them, go to
SAVE ALL
and press button.
7.15 EXIT
Exits SETUP MENU and returns to the normal display
CAMERA ID input line
COMMAND LINE
Содержание VKCD-13100F2810
Страница 54: ...54 Ma e Dimensions mm 9 Ma zeichnungen Dimensional Drawings...
Страница 55: ...55...
