4
5.2 Auto Exposure
1) SHT(s) (Electronic Shutter):
Select Shutter mode
• Auto (/60 (/50) ~ /00,000 Auto run, Manual 8 step from /60 (/50) ~ /0,000)
2) FLC (Flickerless):
Flicker-less On/Off
3) AGC (Auto Gain Control):
AGC Gain (Off, Low, Middle, High)
4) Sens-Up (Slow Shutter):
Maximum Low-Shutter select. (x-x3 and Off)
5) Offset Add:
Force the picture to turn up at low luminance environment
5.3 BLC/WDR
1) Normal AE:
BLC/WDR function off
2) WDR (Wide Dynamic Range):
Wide dynamic range mode on
3) EHLC (Excessive High Light Compensation):
EHLC mode on
• Excessive lighting compensation is performed when the weighting on the high-brightness side is increased.
4) Auto (Auto Weighting BLC):
Auto weighting BLC on
5) Spot (User Setting BLC area):
Spot metering mode on
• Posi: OSD mode to adjust the position of the spot metering area
• Size: OSD mode to adjust the size of the spot metering area
6) Zone (Preset BLC area):
Fixed metering area mode (-9)
5.4 Mask
1) Mask:
Select mask area (-5)
2) Func:
Select mask function (Privacy, BLM, Both, Off)
• Privacy: Area to screen on the display
• BLM: Back Light Mask
Selected BL Mask area that will be except of the auto exposure
If there is a high light installed in a limited environment such as an apartment parking garage or gas
station entrance, removing the high light makes it possible to view car license plates efficiently.
• Both: Privacy function and BLM function on
• Off: Function off
3) Edit:
Mask area edit
• Edit mode take effect during Func not Off
Size: Adjust the size of the Privacy and BLM mask area
Posi: Adjust the position of the Privacy and BLM mask area
Tilt: adjust tilting of Privacy and BLM mask area
Colour: Select Privacy and BLM mask (0-4)
Transparency: Select Privacy mask transparency (Default 3/0-3)
Mosaic: Select Privacy and BLM mask mosaic On/Off
Adj. Mosaic: Adjust Privacy and BLM mask mosaic level (0-3)
