4
3
Day&Night Output
4
COM
5V / 0mA: IR LED ON (NIGHT)
0V:
IR LED OFF (DAY)
4
COM
5
Day&Night Input
Open contact: DAY
Close contact: NIGHT
2) Day&Night I/O Terminals
To select Day/Night mode using external equipment, connect control lines to the appropriate
terminals.
• DAY&NIGHT Output
It is the function that can turn on external IR LED Lamp by detecting the sensitivity on the
AGC level when the D&N mode is set „AUTO” on the OSD menu of the camera.
• DAY&NIGHT External Input
It is the function that can be switched to DAY Mode or NIGHT Mode by receiving the D&N
on/off signal from external light sensor or IR LED LAMP. When D&N Mode is set „External”
on the OSD menu of the camera.
3) Power Input Terminal
100-240V Type
• AC Power Cord
This power cord accepts a00-40V ~ 50Hz ± Hz
12VDC/24VAC Type
• This terminal accepts a VDC or 4VAC power source
from a VDC or 4VAC ±0%, 50/60Hz ±Hz
• Use certified / listed class power supply only.
• In DC power, use the Adapter mode than VDC 500mA
capacity.
