Eneo Rapport III, Инструкция по эксплуатации

Страница: 6 / 24

PRODUCT INTRODUCTION
Summary
Designed, with portability and serious CCTV engineers in mind, the
Rapport in is an advanced piece of video test equipment consisting of
many useful test functions needed to professionally install a CCTV
system; test functions include Video Level, Service Monitor,
Multimeter, UTP Test, PTZ Test, RS-422 and RS-485 Communication
Test, etc.
Major Functions of Rapport III
■ Video Testing
¾ Tests whether a video image is present, and its quality, by
displaying the image on the built-in 3.5" Digital Monitor.
¾
Conducts and displays the Video Level (IRE test) of the image.
¾ Video signal generator Mode: It outputs a Colour Bar which
allows the engineer to test a video monitor or DVR. Rapport ill
supports both PAL & NTSC video signal format.
■ DVR Function (This funtion is only supported by the
Rapport m-PRO)
¾ Store the video input on to a SD Card and play it back.
■ Meter
¾ Functions for testing voltage, resistance and short circuits.
■ PTZ Protocol Analyzer
¾ It determines which protocol controls a PTZ camera from a PTZ
Controller or DVR. This helps the CCTV Installer to understand
the protocol and find faulty devices.
■ UTP Cable Testing
¾ Test the integrity of connection conditions of a Category 5e UTP
cable. Checks for continuity or short circuits.
PRODUCT INTRODUCTION
Standard Items
Check the contents of your Rapport ill package against the standard checklist
below:
Rapport ill Main Test Unit
■ SD Card (2Gb Storage) - (optional,
Rapport m-PRO)
■ Test Lead Set (1 x Red Lead, 1 x Black
Lead)
■ Rechargeable Lithium Polymer Battery
(7.4V 2000mA)
■ UTP Test Terminal - Dongle
■ User Manual
■ Power Adapter (DC12V)
■ Safety Strap
■ BNC Video Cable
■ Tester Carry Bag
10 11
BNC Video cable
Bag
UTP Tester Terminal
Test Lead Set
SD Card
* SD Card is porvided to
Rapport III-PRO only.
Safety
Strap
Power
Adaptor
Rapport III Package