7
OPERATION
---------------------------------------------------------------------------------------------------------------------------
Before starting the camera, installation must be complete. The camera completes a
configuration sequence taking approximately 40 seconds from powering up. Once completed
the amber LED will flash once a second.
NOTE
- If the DHCP is enabled but the camera is not connected to a DHCP server, the camera will
be set default IP 192.168.30.220 and try to get IP from DHCP server about every two
seconds.
- Network and processor bandwidth limitations might cause the video stream to pause or
appear pixelated when an increased number of Web-interface users connect to the camera.
Decrease the images per second, resolution, compression, or bit rate settings of the Web-
interface video streams to compensate for network or processor limitations.
Minimum conditions for using web browser
The minimum system requirements to use a Web browser with this IP camera are as
follows:
- CPU: Pentium® 4 microprocessor, 2.0GHz
- Operational System: Windows XP® or Windows Vista®
or Windows7®
- System Memory: RAM 512 Mbyte
- Ethernet: 100 Mbit
- Video Resolution: 1024(Horizontal) x 768(Vertical) pixels or higher
- Internet Explorer® 7 or later
- ActiveX® 1.0.0.13 or later
Accessing the IP camera
1. Open Web browser
2. Type IP address: - The default IP address is
192.168.30.220
NOTE
- If you do not know the camera’s IP address, install the
Zelaris Elements
utility software
available on the CD supplied with the product. The utility software will locate the assigned
Model name, Host name, MAC address, IP address, Version and others.
- Refer to the
Zelaris Elements
utility software manual for more detail.
3. Log On to the camera
Default User = admin, default password = admin
- Click the Live View icon for default live image view or the Setup icon to change the
configuration values.
