5
6.8.1 CAM TITLE menu
To enter
CAM TITLE
menu, press at
MAIN > SPECIAL > CAM TITLE > ON.
CAM TITLE input line
Command line
Up to 5 characters from the character table can be input.
Use , , , to move cursor(Blink character is on the cursor position) in the character table.
Press to select and the selected character will be input and displayed on CAM TITLE input line.
To move the input position CAM TITLE input line, press on
To clear CAM TITLE input line, press on CLR on command line.
To set the location of CAM TITLE to be displayed on the video, press on POS on command line and then menu
disappears and CAM TITLE will be displayed on the video.
Use , , , to locate CAM TITLE at the proper position and press to fix.
Menu will appear again.
To finish CAM TITLE menu, press ● on RET on command line.
Содержание HDB-2000MIR1080
Страница 58: ...58 8 Ma zeichnungen Dimensional Drawings Ma e Dimensions mm 16 4 100 190 277 100 90 4 80 107 8...
Страница 59: ...59...
