50
Server:
Click on the
Add
button in the Server column to enter the „Server” setting page.
. Enter the Server name, the unique name for a server. Four kinds of servers supported.
They are the email server, FTP server, HTTP server and network storage.
. Set the details of the Email.
„Sender email address”
: The email address of the sender.
„Recipient email address”
: The email address of the recipient.
. Set the details of the FTP.
„Remote folder name”
: An authorized folder on the external FTP server. The string
must conform to that of the external FTP server. Some FTP servers cannot accept a preceding slash symbol
before the path without virtual path mapping. Refer to the instructions for the external FTP server for details.
The folder privilege must be open for uploading.
„Passive Mode”
: Check it to enable the passive mode in
transmission.
4. Set the details of the Network storage. Only one network storage is supported.
„Network storage location”
:
The path to upload the media.
„Workgroup”
: The workgroup for network storage.
5. Click on the SD card to activate the function. Use the SD card to record media.
6. Click on „Submit” to save or click on „Don’t Submit” to go back to the Event main page.
