7
7. Click the
Home
button to return to the home page while the new image setting acts on the images to effect the
desired changes instantly. (If the setting has not been changed by the above steps, any (re)entry onto the home
page will find images in their earlier or original setting.)
Exchange the image format
. Tick on one of the formats then press the
Submit
button.
. The IP camera will restart automatically after several seconds.
Description of function keys
MPEG4 mode
Device Title:
Type in the camera title in the given space.
Resolution:
Scroll to choose the image resolution from „VGA” or „QVGA”.
Quality:
Scroll to choose the image quality out of a spectrum of qualities ranging from „highest”, „high”,
„medium”, and „low” to „lowest”. In MPEG4 mode, you can also set the quality by typing in the value.
The custom quality value must be in the range between 64 Kbps to 89 Kbps.
Frame rate:
Click the drop-down list to choose the frame rates of „5FPS”, „4FPS” or „5FPS”.
Format:
Click to choose the „MJPEG” or the „MPEG4” mode.
Fine Tune mode
Brightness:
Enter your desired quality of image brightness from a spectrum of 0 to 55.
Saturation:
Type in the saturation level in the blank (0 to 55).
MJPEG mode
Viewer type:
Click to choose the viewer type of the „ActiveX” or „JAVA Applet” mode.
Submit:
Click to submit the new image setting to the IP camera.
Default:
Click this button to install the default settings in all the entries for image parameters on this page.
