Eneo EPS-1016, Полное руководство

Страница: 21 / 36

There firstly add your VLAN Groups (identified throughout your network by
unique and constant numbers). Start with IDs from 100 and up. Keep in mind
that some switches use “1” as the default, while others use “4095” or “4096” as
default. Starting with 100 gives you enough free room and less compatibility
issues.
So enter “100” in the field right of VID Setting, then select or deselect which
ports are member of that group. Your up- and downlink ports need to member
of every existing group! Then click on add. The new group with its setting will
be displayed at the bottom of the screen.
With the PVID Setting you define to which VLAN group incoming traffic
belongs. Consider the example that Port 1 is member of group 100 and 101. A
simple PC is connected to Port 1. If that PC is now sending out data, with PVID
you define if that data is for group 100 or 101.
Figure 4-4
19