ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
18
2-1. AF MODE
2.
ZOOM/FOCUS
• ZOOMPUSH: Focusing works steadily for sharp focusing on the object.
In the case of a Motor driven lens, focusing resumes in about 7~8 seconds
to save the lens lifetime when the focus gets lost.
• MANUAL: Focusing can only be adjusted by ▲,▼ of OSD control joystick.
2-2.
MODE CHANGE
2-3.
D&N FILTER
MODE CHANGE is activated to set ZOOMPUSH in AF MODE.
It is for locking of the lens control to prevent undesirable operation.
2-4.
INITIAL
2. ZOOM/FOCUS
AF MODE Changes to MANUAL automatically
after 3 hrs when MODE CHANGE is ENABLED.
AF MODE
MODE CHANGE
D&N FILTER
INITIAL
RETURN
ZOOMPUSH
ENABLED
SYNC OFF
OFF
• ENABLED : Locks and disables the lens operation after 3 hours.
It is recommended to maintain the working-life of the motorized zoom lens.
• DISABLED : Disables the locking feature allowing lens operation at any time.
• SYNC ON : Focusing is activated whenever ICR filter is changed when
camera switches from Day to Night or Night to Day.
• SYNC OFF : Focusing is not activated even if ICR filter is changed.
Lens initialization is necessary during the installation or the regular operation
to align the position data with the mechanical positions whose lens elements
may move and deviate from its calibrated position by the shock or vibration,
for example, during the transportation. Lens initialization is automatically
executed at power up.
INITIAL starts the lens initialization when pressing the joystick straight down
for about 2 sec. It is strongly necessary to execute LENS INIT in cases below;
- At the final step for the installation.
- When focus becomes out of control by the shock or vibration.
(Available only with AF MODE is ZOOMPUSH)
2. ZOOM/FOCUS
AF MODE
MODE CHANGE
D&N FILTER
INITIAL
RETURN
ZOOMPUSH
NOT USED
SYNC OFF
OFF
