The device is designed to operate in
temperatures from -30°C to 55°C. The
manufacturer does not guarantee the correct
operation of the charging station at temperatures
outside of the specified range. Chargers
damaged by temperatures below -30°C or above
55°C are not covered under the warranty.
The correct way to clean the charger is to wipe
the casing with a microfibre cloth using a cleaner
dedicated to the plastic of the casing. Plastic
parts (the socket) should be cleaned with a
microfibre cloth using a cleaning agent dedicated
to glass. Other cleaning methods (e.g. using
a wire brush) may damage the casing.
Damage caused by improper cleaning of the
device does not constitute grounds for warranty
claims.
Maintenance
Cleaning
03
04
The interface provides only basic operational
information, detailed information can be read
from the configuration panel.
Status
Light type
Availability
Green flashing
Charging (energy
transfer in progress)
Blue flashing from
inside towards the
edge
Charging (no energy
transfer)
Blue flashing
Warning/minor error
(the charger will
attempt to return to
its previous state)
Yellow flashing
Error
Red flashing
Fatal error
Steady red
Authorisation
User acceptance
Running from left to
right in green
User rejection
Running from left to
right in red
Authorisation pending White dot moving
from left to right
20
02
Interface LED
The Lumina charging station has an LED
interface that provides the user with basic
information:
