SOLAR PANEL 40P6
– USER MANUAL
ENDUROSAT
13
9 MATERIALS AND ASSEMBLY
The PCB material is FR4-Tg170. The production process follows quality standards:
•
IPC-A-600H
Ⅱ
(Surface)
•
IPC-A-6012 (Function)
•
IPC-TM-650 (Test Method)
The component mounting follows quality standards:
•
IPC-A-600 Acceptability of Printed Boards
•
IPC-A-
610Е
Acceptability of Electronic Assemblies
•
J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies
•
ISO 14644 Cleanrooms and Associated Controlled Environments
•
IEC 61340 Electrostatics ESD: Protection of Electronic Devices from Electrostatic Phenomena
10 HANDLING AND STORAGE
Particular attention shall be paid to the avoidance of damage to the solar panel during handling,
storage and preservation. The handling of the solar panel should be performed in compliance with the
following instructions:
•
Handle using PVC, latex, cotton (lint free) or nylon gloves.
•
The environment where the solar panel will be handled shall meet the requirements for a class
environment 100,000, free of contaminants such as dust, oil, grease, fumes and smoke from
any source.
•
Do not touch the solar cells on the solar panel.
•
Solar panels must be handled by touching the PCB edges only.
•
Solar panels shall be stored in such a manner as to preclude stress and prevent damage.
•
To prevent the deterioration of the solar cells, then the solar panel shall be stored in a
controlled environment (i.e. the temperature and humidity levels shall be maintained within the
proper ranges):
o
Ideal storage temperature range: 15ºC to 27ºC
o
Ideal storage humidity range: 30% to 60% relative humidity (RH)
