Enduro EM303A, Руководство пользователя

Страница: 41 / 56

enduro
®
EM303A 36
Ref: EM303A-UM-TKI-1211-Rev.A.
In general, all error messages will reset automatically after one minute. If this is not the case, reset the
electronics of the manoeuvring system by switching off the manoeuvring system via the isolation switch and the
remote control handset for at least 15 seconds and then turn them on again.
Roller will not turn, spindle rotates freely:
The motor or gear is broken, please contact your enduro
®
supplier.
In case of any doubt, please call your enduro
®
supplier.
GUARANTEE
This product is covered by a 3 year guarantee. Please note that our guarantee covers reasonable use of the
manoeuvring system, it does NOT cover any damage caused by misuse. This also applies to a malfunction or
failure of the manoeuvring system that has been caused by poor or incorrect installation. To ensure the validity
of the guarantee please carry out maintenance in accordance with the maintenance section. We reserve the
right to make a call out and/or repair charge for any work required to be undertaken to rectify faults that are
outside of the company’s control i.e. caravan battery failure, incorrect or poor fitting, misuse, accidental
damage, etc.
Please fill-in the serial number on the product registration form and return to the appropriate
address (see last page).
Important! Retain this manual for future reference.