enduro
®
EM303A 26
Ref: EM303A-UM-TKI-1211-Rev.A.
INTRODUCTION
Congratulations on choosing the enduro
®
EM303A caravan manoeuvring system. This has been produced
according to very high standards and has undergone careful quality control procedures.
Simply by using the remote control handset you can move your caravan effortlessly into any position required
within operating guidelines. Soft start and soft stop technology allows you to manoeuvre your caravan even
more accurately without any shocks.
The caravan manoeuvring system consists of two 12V motor-power rollers, a 12V electronic control unit and a
remote control handset. To function, the motor-powered rollers must be engaged against the tyres of your
caravan. The enduro
®
EM303A Caravan manoeuvring system is provided with an automatic engaging system.
By pushing two buttons on the remote control, both motor-powered rollers will be simply pressed on the tyre.
Once this is done the manoeuvring system is ready for operation. The remote control will allow you to move
your caravan in any direction. You can even rotate the caravan on it’s own axis, without moving forwards or
backwards.
Before proceeding with installation and starting to use the manoeuvring system, please read
this manual very carefully and be aware of all the safety instructions! The owner of the
caravan will always be responsible for correct use. Keep this manual inside your caravan for
future reference.
INTENDED USE
The enduro
®
EM303A caravan manoeuvring system is only suitable for single axle caravans.
Suitable only for L-profiled and U-profiled chassis with a chassis thickness between min. 2.8mm and max.
3.5mm.
Depending on the weight of the caravan, the manoeuvring system cannot overcome obstructions that are more
than about 2cm in height without assistance (please use wedges as a ramp).
The standard installation kit only provides parts for installing the caravan manoeuvring system within the
measurements given in Fig.14.
SPECIFICATIONS
Designation
enduro
®
EM303A
Operational
voltage
12
Volt
DC
Average current consumption
20 Ampere
Maximum current consumption
100 Ampere
Transmitting frequency remote control
433MHz
Speed
approx.
12cm
per
sec.
Weight
approx.
34kg
(exclusive
battery)
Permissible overall Weight
1800kg
Permissible overall Weight on 20% Gradient
1450kg
Minimum width (caravan/trailer)
1800mm
Maximum width (caravan/trailer)
2500mm
Maximum
tyre
width
205mm
Power source (caravan leisure battery)
12V 105Ah (recommended), 12V 85Ah (minimum)
INSTALLATION - SAFETY GUIDELINES
Read this user manual carefully before installation and use. Failure to comply with these
rules could result in serious injury or damage to property.
These symbols identify important safety precautions. They mean CAUTION! WARNING!
SAFETY FIRST! IMPORTANT INFORMATION!
Before starting installation under the caravan:
Check the towing load of your vehicle and the gross weight of your caravan in order to establish whether they
are designed for the additional weight. The manoeuvring system itself has a weight of about 34kg and a battery
has a weight of about 20-25kg.
Check the minimal installation dimensions of the manoeuvring system based on figure 14.
Only use adapters and accessories that are supplied or recommended by the manufacturer.
Содержание EM303A
Страница 54: ...enduro EM303A 49 Ref EM303A UM TKI 1211 Rev A ...
