Enduro AS201A, Руководство пользователя

Страница: 35 / 48

EN
DURO
®
auto Steady 28
Ref: AS201A&B-UM-TKI-0415-Rev. A
INTRODUCTION
Congratulations on choosing the EN
DURO
®
auto Steady system AS201A or AS201B. This product has been
produced according to the highest standards and has undergone careful quality control procedures.
The auto Steady system consists of four motorized corner steadies, a 12Volt electronic control unit, and a
remote control.
Simply by using the remote control you can lower or draw back your caravan corner steadies effortlessly. The
auto Steady system comes with an automatic function: By pushing the “Auto” button on the remote control,
four corner steadies will be lowered or drawn back automatically. The remote control also allows you to operate
each corner steady individually.
The soft start technology, ensures ease of action and protects the motors which leads to a prolonged life of the
system.
Before proceeding with installation and starting to use the auto Steady system, please read
this manual very carefully and be aware of all the safety instructions! The owner of the
caravan will always be responsible for correct use. Keep this manual inside your caravan for
future reference.
INTENDED USE
The EN
DURO
®
auto Steady system AS201A is suitable for retrofitting on an AL-KO chassis (for dimensions and
specifications see Fig. 1 AS201A).
The EN
DURO
®
auto Steady system AS201B is suitable for retrofitting on a BPW chassis (for dimensions and
specifications see Fig. 1 AS201B).
Just as the standard corner steady of your caravan can only be used for stabilising, also the auto Steady system
cannot be used for jacking up or levelling out your caravan.
To avoid the corner steady feet to sink in the ground, the auto Steady system is supplied with four ground
support plates that can be permanently fixed on the steady feet (Fig. 4). Depending on the situation of ground,
you may need some more assistance.
SPECIFICATIONS
Designation EN
DURO
®
auto Steady AS201A (AL-KO Version)
EN
DURO
®
auto Steady AS201B (BPW Version)
Operational voltage 12 Volt DC
Average current consumption 6 Ampere
Maximum current consumption 24 Ampere
Transmitting frequency remote control 868MHz
Weight approx. 34kg (exclusive battery)
Min. permissible overall weight caravan 800kg
Max. permissible overall weight caravan 2000kg
Power source (battery) LiFePO
4
: 12V, 20Ah (recommended EN
DURO
®
LI1220)
Lead acid: 12V, 20Ah (min.)
INSTALLATION SAFETY GUIDELINES
Read this user manual carefully before installation and use. Failure to comply with
these instructions could result in serious injury or damage to property.
These symbols identify important safety precautions. They mean CAUTION! WARNING!
SAFETY FIRST! IMPORTANT INFORMATION!
Before starting installation under the caravan :
Check the towing load of your vehicle and the gross weight of your caravan in order to establish whether they
are designed for the additional weight. The autoSteady system itself adds a weight of about 34kg (However,
the existing steadies will lapse and compensate approximately 20kg) and a traditional lead acid battery has a
weight of about 20-25kg (the by us recommended EN
DURO
®
LI1220 LiFePO4 battery weighs only 4,3kg).
Only use adapters and accessories that are supplied or recommended by the manufacturer.
Check that the caravan is disconnected from the battery supply and the mains electrical supply.