Endurance FB300 Fan Bike, Руководство пользователя

Страница: 19 / 42

Console Operation
INITIAL SETUP
Metric & Standard Unit:
The initial factory setting is in “Miles”. To toggle between
Miles and Kilometers, press and hold “S” & “ENTER” buttons for 2 seconds. Press “UP” or
“DOWN” arrows to select KM or ML and then press “ENTER” to confirm.
Battery Installation:
Console operates on two AA batteries. The battery compart-
ment is on the back of the console.
MODES
Standby Mode:
When Powered on and RPM signal is detected, the console beeps and
then goes to Standby Mode. If no other button is pressed, it will go Quick Start Mode
automatically.
Sleep Mode:
When RPM Signal or Data is not detected for 60 seconds, it will
automatically enter Sleep Mode.
Reset Mode:
Press “STOP” for 2 seconds, Console will run a “TOTAL RESET”.
Pause Mode:
Press the Start” Button during the Workout Mode will Pause the program.
End Mode:
Press “STOP” button once, it will end the program and post the workout
sumary.
19