Endurance FB300 Fan Bike, Руководство пользователя

Страница: 12 / 42

Step 4
NOTE:
Some hardware components may be pre-assembled. Be aware of
Nylon lock nuts not fully screw onto bolts, they must be tightened
with a wrench to ensure proper engagement.
4A.
Feed the Speed Sensor Cable (#30) through the Upright (B).
4E.
Attach the Upright (B) to Main Frame (A) using:
Two M8x20mm Button Head Cap Screws (#5)
Two M8 Lock Washers (#6)
Two M8 Washers (#7)
4F.
Connect Cable (#30) to the Console (S)
4G.
Attach the Console (S) to Upright (B) using:
Four M5x10mm Phillips Screws (#29)
12