background image

C o m p o n e n t   R e p l a c e m e n t

24

REPLACING THE BRAKE KNOB

      To replace the brake knob:

Remove Socket Head Bolts (61) and Washers (67) 

to disassemble the brake assembly.

See Diagram 1.

While holding Nut (51) with a wrench, loosen Brake 

Knob (13) by hand.

See Diagram 2.

Remove  Acorn  Cap  Nut  (46),  Nut  (51),  Brake  Ad-

justment Nut (30), Rubber Spacer (14), Brake Knob 

(13) and Brake Screw (29) one at a time.

Replace Brake Knob (13), then insert Brake Screw 

(29) into the new Brake Knob (13) and insert them 

into the mainframe.

Replace Rubber Spacer (14), Brake Adjustment Nut 

(30), Nut (51) and Acorn Cap Nut (46).

 Tighten Nut (51) with a wrench while holding onto 

Brake Knob (13) by hand. Make sure Acorn Cap Nut 

(46) is properly secured.

Install the brake assembly onto the mainframe us-

ing Socket Head Bolts (61) and Washers (67).

See Diagram 1.

REPLACING THE SEAT

      To replace the seat:

Loosen the nuts underneath Seat (7) as shown in 

Diagram 3. 

NOTE: Do not completely remove the nuts.

Take off the old seat.

Insert a new Seat (7) making sure that the nuts are 

loose.

Tighten the nuts underneath Seat (7) as shown in 

Diagram 3.

A.

B.

C.

D.

E.

F.

G.

5#*&5 !55@5 5$5 ,* 5 )!-5 )5D3>@

E>

65@5 5)*5*5

5 55!5.) (65!5*5 5(5 5 )55 ,* 5!1D>26*5)*&5

(5!55*&5+ .5.5*9

Diagram 1

Diagram 2

A.

B.

C.

D.

C95)*5*"!55 ,* 5!5.5!555*555*55)  9

Diagram 3

Loosen Here

Содержание ESB250





































Отзывы: