2
Important
1. Read all Caution statements below and this User Manual before attempt-
ing to charge a battery.
2. Check to make sure a charging pod compatible with your battery is prop
-
erly installed on charger before placing battery in pod.
3. Always charge new batteries completely before initial use. Recycle batteries
when they can no longer be used. Do not discard unwanted batteries in the
trash or incinerate. Batteries exposed to fire or excessive heat may explode
4. For best battery performance, charge NiCd and NiMH batteries when
they are fully discharged.
Caution
1. Never charge alkaline or dry cell batteries with this charger. They may
burst and cause damage or personal injury.
2. Do not charge Li-Ion, NiMH, or NiCd batteries unless they are designed
with overcharge protection.
3. Use charger inside a vehicle only. Do not expose the charger to rain, any
liquids, or excessive moisture.
4. Do not attempt to charge a battery without first installing the appropriate charg
-
ing pod. Use only charging pods designed for the NCC0355. Disconnect charger
from power before installing, adjusting, or removing the charging pod.
5. Make sure contacts in charging pod and battery are clean. Do not allow
wire or metal objects to touch contacts in charging pod or any internal
part of the charger.
6. Do not remove the charger’s housing or make any modification to the charger.
7. Use only the vehicle power adapter supplied with the NCC0355 charger. If a
replacement is required, order part number TWC6-VPA. Use of other vehicle
power adapters may damage the charger or batteries you attempt to charge.