Endress ESE 2000I, Руководство по эксплуатации, Страница: 13 / 40

13
Operation
Operation
Transporting the generator
Requirements
• The generator is turned off
• On/Off switch in “Stop” position, Figure 4, No. 5
• Fuel tap in “Off” position, Figure 4, No. 6
• Fuel tank lid ventilation in “Off” position, Figure 5, No. 2
• The generator has cooled down
• Connection lines are disconnected.
DANGER!
The device may cause severe injury if it falls or slides away.
• Bear in mind that the device weighs approx. 21 kg.
• Place the device on a non-skid fl oor and secure it further (such
as with tension straps).
DANGER!
Beware of petrol odours.
• If the generator contains motor oil or petrol, it must be
transported only in upright position.
• Heat can vaporize the petrol in the carburettor and become an
explosive gas.
• Intense shocks (during transport) can make petrol over fl ow
into the carburettor.
• Carefully wipe up leaking fuel.
Carrying the device
1 Grip the device by the support handle.
2. Lift the generator.
3. Carry generator to place of use.
4. Set down the generator.
5. Let go of the handle.
✓
The generator has been carried to its work site.