manualshive.com logo in svg

Endress+Hauser Thermophant T TTR 35, Руководство по эксплуатации

Поделиться
Скачать
Endress+Hauser Thermophant T TTR 35 Скачать руководство пользователя страница 25

Thermophant T TTR31, TTR35

Diagnostics and troubleshooting

Hauser

25

6.2.2  

Notes on operating with Readwin 2000

Further information on the ReadWin 2000 configuration software is available in the

Operating Instructions (BA137R/09/en), which can be found on the CD-ROM of the

configuration software..

6.2.3  

Notes on operation with FieldCare

FieldCare is a universal configuration and service software based on FDT/DTM technology.

• To configure the device with FieldCare, the "PCP (ReadWin) Communications DTM"

and the device DTM for the Thermophant are required.

• All devices with software version 1.01.00 or higher can be configured with FieldCare.

• This device supports offline configuration and upload/download of parameters. Online

configuration of the device is not supported.

Detailed information on FieldCare can be found in the associated Operating Instructions

(BA027S/c4) or at www.endress.com.

7  

Diagnostics and troubleshooting

7.1  

General troubleshooting

If an error occurs in the device, the color of the status LED changes from green to red and the

lighting of the digital display from white to red. A flashing red/green status LED signals a

warning. The display shows:

• An E-code in the event of errors

The measured value is uncertain if an error occurs.

• A W-code in the event of warnings

The measured value is reliable if warnings occur.

Code Description

Remedial action

E011 Device configuration is incorrect

Perform device reset →   15

E012 Measurement error or medium temperature outside the

measurable range

Check the medium temperature; return the
device to the manufacturer if necessary

E019 Power supply out of specification

Check operating voltage and set to a valid
value

E015

Memory error

Return device to manufacturer

E020

E021

E022 Power is only supplied to the device via the communication

interface (measurement is disabled)

Check operating voltage

E025 Switching contact 1 is not open even though it should be

Switching contact is defective, return to
manufacturer

Содержание Thermophant T TTR 35

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды