Endress+Hauser Teqwave T, Руководство по эксплуатации, Страница: 35 / 54

Teqwave T Operation
Hauser 35
9.4 Additional dosage
A dosage recommendation can be configured for the measurement points. This recommen-
dation appears as soon as the measured value is outside the valid, green range. The recom-
mendation for additional dosing is based on the actual concentration level measured and the
target concentration of the liquid indicated in the measurement point. The measuring device
displays the recommendation after the measured value is saved. The recommendation is
specified in liters or kilograms as an absolute amount or as a value per 100 liter tank volume.
By organizing the customer's operating screen into measurement points, it is possible to
create process-specific criteria for additional dosing for each process.
Incorrect process management
Irresponsible additional dosing can cause errors in the process. The user is responsible for
managing the process correctly.
‣
Implement the dosage recommendation responsibly.
9.4.1 Performing an additional dosage
Prerequisites
• Measurement is performed and saved.
• Measured value is outside the valid range.
Performing an additional dosage
1. Add the additional dosage amount displayed to the concentration.
Depending on whether the measured concentration is too high or too low, the
measuring device recommends that you either add additional concentrate or addi-
tional base. If adding base to dilute the concentration, the user must first check
whether it is even possible to add such an amount in the plant.
2. Press the Confirm button to accept the dosing recommendation.
NOTICE