Endress+Hauser Stamolys CA71SI Series, Техническая информация

Страница: 12 / 16

Stamolys CA71SI
12 Hauser
Ordering information
Product page You can create a complete and valid order code by using the configurator on the internet product page.
Enter the following address to access the product page:
www.products.endress.com/ca71si
Configurator 1. You can choose from the following options on the product page located on the right:
2. Click "Configure this product".
3. The configurator opens in a separate window. You can now configure your device and receive the
complete order code that applies for the device.
4. Afterwards, export the order code as a PDF or Excel file. To do so, click the appropriate button at the top
of the page.
Product structure The following product structure represents the status of printing. You can create a complete and valid
order code on the Internet using the configurator tool.
Measuring range
A Measuring range 1.0 ... 200 μ g/l SiO
2
B Measuring range 50 ... 5000 μ g/l SiO
2
Y Special version acc. to customer’s specification
Sample transfer
1 Sample transfer from one measuring point (one-channel version)
2 Sample transfer from two measuring points (two-channel version)
Power supply
0 Power supply 230 V AC / 50 Hz
1 Power supply 115 V AC / 60 Hz
Collecting vessel for up to 3 analysers
A Without collecting vessel
B With collecting vessel without level measurement
D With two collecting vessels without level measurement (two-channel version)
Housing version
1 Without housing (open version)
2 With GFR housing
3 With stainless steel 1.4301 (AISI 304) housing
Communication
A 0/4 ... 20 mA, RS 232
Additional equipment
1 Quality certificate
2 Quality certi set of inactive reagents
3 Quality certi three sets of inactive reagents
CA71SI - complete order code