Endress+Hauser SS2000XP, Руководство по эксплуатации

Страница: 20 / 60

SS500XP/SS2000XP Gas Analyzer BA02183C
3
–
2 Hauser
This section includes:
•
Hardware and tools for installation
•
Mounting the analyzer
•
Connecting Electrical Power to the Analyzer
•
Connecting the Output Signals
•
Connecting the Gas Lines
Hardware and tools for installation
Depending on the particular model, the configuration of accessories and
options ordered, you may need the following hardware and tools to complete
the installation process.
Hardware
•
Membrane separator filter (if not included)
1
•
Pressure regulator (if not included)
1
•
Stainless steel tubing (Hauser recommends using 1/4 in.
O.D. x0.035 in. wall thickness, seamless stainless steel tubing)
•
1/2 in. conduit hubs
•
Conduit (rigid)
•
Source of plant nitrogen gas (4 SCFH) for purge unit(s), if applicable
•
1/2 in. or 3/8 to 16 in. Unistrut (or equivalent) bolts and spring nuts
•
3/8 in. x 1-1/2 in. machine screws and nuts (for non-Unistrut
installation)
•
3/4 in. or 1/2 in. EYS (or equivalent) seals
•
1/4 in. Swagelok 400-1-4 (or equivalent) connectors
Tools
•
Hand drill and bits
•
Tape measure
•
Level
•
Pencil
•
Socket wrench set
•
Screw driver
•
Crescent wrench
•
9/16 in. open-end wrench
1 If your system comes equipped with a sample conditioning system, refer to the Sample
Conditioning System (SCS) manual for more information.