Endress+Hauser Prosonic S FMU95, Руководство по эксплуатации

Страница: 72 / 108

Commissioning Prosonic S FMU95
72 E Hauser
• bargraph profile (default)
Bargraphs are displayed for up to 10 measuring values.
"time"
This parameter is used for the options "value max. size" and "alter 53x2 values". It specifies the time
after which the next page appears.
!
Note!
To change to the next page immediately, press
.
"value 1" ... "value 10"
Use these parameters to allocate a measured or calculated value to each of the display values. The
selection depends on the instrument version and installation environment.
"cust. text 1" ... "cust. text 10"
These parameters can be used to allocate a text string to each of the display values. This text is
displayed together with the value if
"customized text" (in the "display format" parameter set) has
been set to "yes" .
6.5.2 "display format"
"format"
Use this parameter to select the display format for numbers.
Selection:
• decimal (Default)
• ft-in-1/16"
"no. of decimals"
Use this parameter to select the number of decimals for the representation of numbers.
Selection:
• x
• x.x
• x.xx (Default)
• x.xxx
"sep. character"
Use this parameter to select the separation character for the representation of decimal numbers.
Selection:
• point (.) (Default)
• comma (,)

display format DX201
format:
no. of decimals:
sep. character:
customized text: