Endress+Hauser Promag 400 Index C, Руководство по установке

Страница: 10 / 28

EA01097D
10 Hauser
11
4 mm
1.
2.
3.
7.3 Promag 400 compact version
7.3.1 Assembling the transmitter
Ensure that the amplifier connector (Fig. 5 below) has been plugged in correctly. If the
current transmitter has a connection board (as in Fig. 3), this board must be installed in
the new transmitter. This is because the connection board contains the S-DAT with all
the sensor-related data. In this case, the jumper must be removed as indicated (Fig. 1
below).
1 → 2 → 3 →
4 mm
5.5 Nm
(4.1 lbf ft)
1.
2.
3.
‣
1. This step must only be
performed if a connection board
is present.