Endress+Hauser Proline Promass O 100HART, Руководство по эксплуатации

Страница: 100 / 140

Technical data Proline Promass O 100 HART
100 Hauser
16.6 Performance characteristics
Reference operating
conditions
• Error limits based on ISO 11631
• Water with +15 to +45 °C (+59 to +113 °F) at2 to 6 bar (29 to 87 psi)
• Specifications as per calibration protocol
• Accuracy based on accredited calibration rigs that are traced to ISO 17025.
To obtain measured errors, use the Applicator sizing tool (→  111)
Maximum measured error o.r. = of reading; 1 g/cm³ = 1 kg/l; T = medium temperature
Base accuracy
Mass flow and volume flow (liquids)
±0.05 % o.r. (PremiumCal, for mass flow)
±0.10 %
Mass flow (gases)
±0.35 % o.r.
Design fundamentals (→  102)
Density (liquids)
• Reference conditions:±0.0005 g/cm³
• Standard density calibration:±0.01 g/cm³
(valid over the entire temperature range and density range )
• Wide-range density specification (order code for "Application package", option EF "Special
density and concentration ") : ±0.001 g/cm³ (valid range for special density calibration:
0 to 2 g/cm³, +5 to +80 °C (+41 to +176 °F))
Temperature
±0.5 °C ± 0.005 · T °C (±0.9 °F ± 0.003 · (T – 32) °F)
Zero point stability
DN Zero point stability
[mm] [in] [kg/h] [lb/min]
80 3 9.0 0.330
100 4 14.0 0.514
150 6 32.0 1.17
Flow values
Flow values as turndown parameter depending on nominal diameter.
SI units
DN 1:1 1:10 1:20 1:50 1:100 1:500
[mm] [kg/h] [kg/h] [kg/h] [kg/h] [kg/h] [kg/h]
80 180 000 18 000 9 000 3 600 1 800 360
100 350 000 35 000 17 500 7 000 3 500 700
150 800 000 80 000 40 000 16 000 8 000 1 600