Endress+Hauser Proline Promass F 200 HART, Руководство по эксплуатации

Страница: 85 / 158

Proline Promass F 200 HART Commissioning
Hauser 85
Simulation current
output 1-2 - Switch simulation of
the current output
on and off. • Off
• On Off
Value current
output 1-2 The On option is selected in the
Simulation current output
1-2
parameter.
Enter the current
value for simulation. 3.6 to 22.5 mA Current value
currently measured
Frequency
simulation - Switch simulation of
the frequency
output on and off. • Off
• On Off
Frequency value The On option is selected in the
Frequency output
simulation
parameter.
Enter the frequency
value for simulation. 0 to 1 250 Hz Frequency currently
measured
Pulse simulation - Set and switch off
pulse output
simulation. • Off
• Fixed value
• Down-count val.
If the Fixed
value option
is selected,
the
Pulse
width
parameter
defines the
pulse width of
the pulses
output
(
®
ä
61).
Off
Pulse value The Down-count. val. option
is selected in the Simulation
pulse output parameter.
Enter the number of
pulses for
simulation. 0...65535 Pulse currently
measured
Switch output
simulation - Switch simulation of
the switch output on
and off. • Off
• On Off
Switch status The On option is selected in the
Switch output simulation
parameter.
Select the status of
the status output for
the simulation. • Open
• Closed Open
Simulation device
alarm - Switch the device
alarm on and off. • Off
• On Off
10.8 Protecting settings from unauthorized access
The following options exist for protecting the configuration of the measuring device from
unintentional modification after commissioning:
• Write protection via access code (
®
ä
85)
• Write protection via write protection switch ( ®
ä
86)
• Write protection via keypad lock ( ®
ä 43)
10.8.1 Write protection via access code
With the customer-specific access code, the parameters for the measuring device configuration are
write-protected and their values can no longer be changed via local operation.