Endress+Hauser Proline 800, Краткое руководство по эксплуатации

Страница: 15 / 44

Proline 800 Cellular radio Mounting
Hauser 15
14.
15.
13.
4 mm 4 x
A0044277
13. Loosen the fixing screws of the transmitter housing (when reassembling, pay attention
to the tightening torque →  15).
14. Lift the transmitter housing.
15. Turn the housing to the desired position in increments of 90°.
Reassembling the transmitter housing
L
WARNING
Excessive tightening torque applied to the fixing screws!
Risk of damaging the plastic transmitter.
‣
Tighten the fixing screws as per the tightening torque: 2 Nm (1.5 lbf ft)
Step
→  11 Fixing screw Tightening torques
1 Housing cover 1 Nm (0.7 lbf ft)
9 Electronics module 0.6 Nm (0.4 lbf ft)
11 Main electronics module 1.5 Nm (1.1 lbf ft)
13 Transmitter housing 5.5 Nm (4.1 lbf ft)