Endress+Hauser Proline 500, Краткое руководство по эксплуатации

Страница: 35 / 40

Flowmeter Proline 500 – digital Diagnostic information
Hauser 35
Example: Available submenus, wizards Meaning
System units Configuration of the units for all measured values
Medium selection Definition of the medium
Communication Configuration of the communication interface
I/O configuration User configurable I/O module
Current input Configuration of the input/output type
Status input
Current output 1 to n
Pulse/frequency/switch output 1 to n
Relay output
Double pulse output
Display Configuration of the display format on the local display
Low flow cut off Configuration of the low flow cut off
Partially filled pipe detection Configuration of the detection of partially filled and empty pipes
Advanced setup Additional parameters for configuration:
• Calculated process variables
• Sensor adjustment
• Totalizer
• Display
• WLAN settings
• Data backup
• Administration
8.4 Protecting settings from unauthorized access
The following write protection options exist in order to protect the configuration of the
measuring device from unintentional modification:
• Protect access to parameters via access code
• Protect access to local operation via key locking
• Protect access to measuring device via write protection switch
For detailed information on protecting the settings against unauthorized access, see the
Operating Instructions for the device.
For detailed information on protecting the settings against unauthorized access in
custody transfer applications, see the Special Documentation for the device.
9 Diagnostic information
Faults detected by the self-monitoring system of the measuring device are displayed as a
diagnostic message in alternation with the operational display. The message about remedial