Commissioning
Proline 200 PROFIBUS PA
30
Hauser
Wizard
Meaning
Low flow cut off
Set the low flow cut off
Partially filled pipe detection
Configure partial and empty pipe detection
Current input
Configure the current input
8.5
Defining the tag name
To enable fast identification of the measuring point within the system, you can enter a unique
designation using the
Device tag
parameter and thus change the factory setting.
1
XXXXXXXXX
A0029422
4
Header of the operational display with tag name
1
Tag name
Navigation
"Setup" menu → Device tag
Parameter overview with brief description
Parameter
Description
User entry
Factory setting
Device tag
Enter the name for the
measuring point.
Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /).
Promass 200
8.6
Protecting settings from unauthorized access
The following write protection options exist in order to protect the configuration of the
measuring device from unintentional modification:
• Protect access to parameters via access code
• Protect access to local operation via key locking
• Protect access to measuring device via write protection switch
For detailed information on protecting the settings against unauthorized access, see the
Operating Instructions for the device.
Содержание Proline 200 PROFIBUS PA
Страница 32: ...www addresses endress com...