Installation
Hauser
7
3
Installation
3.1
Incoming acceptance, transport, storage
• Make sure the packaging is undamaged!
Inform the supplier about any damage to the packaging.
Keep the damaged packaging until the matter has been settled.
• Make sure the contents are undamaged!
Inform the supplier about damage to the contents. Keep the damaged products until the matter has
been settled.
• Check that the order is complete and agrees with your shipping documents.
• The packaging material used to store or to transport the product must provide shock protection and
humidity protection. The original packaging offers the best protection. Also, keep to the approved
ambient conditions (see "Technical data").
• If you have any questions, please contact your supplier or your local sales center.
3.2
Installation conditions
3.2.1
Angle of installation
The sensor must be installed with an inclination angle of at least 10
˚
to the horizontal in an assembly,
support or a corresponding process connection. Other inclination angles are not permitted. Do
not
install the sensor overhead.
Observe the instructions for installing sensors in the Operating Instructions for the assembly used.
a0005584-en
Fig. 1: Permitted angle of installation
10°
10° Not permissible!
Not permissible!
Permissible angle of installation
