Endress+Hauser NXA821 Скачать руководство пользователя страница 17

Страница: 17 / 76

Tankvision

Connections to gauges and host systems

Hauser

6.1.2

Field devices

The following list gives an overview on possible field instruments which can be connected

directly or via system components. Nevertheless the connection possibilities are not limited

to these devices.

• Micropilot NMR8x

Micropilot NMR81 is used for custody transfer and inventory control applications with

NMi- and PTB-approvals and meets the requirements according to OIML R85 and API

3.1B. NMR81 is particularly suited for free space applications up to 70 m. The drip-off lens

antenna with 79 GHz transmitting frequency produces a sharply focused beam angle of 3°

and avoids obstacles even close to tank wall.

Micropilot NMR81 is available with Modbus RS485 and Sakura V1 output.

For more information see TI01252G/00/EN.

Micropilot NMR84 is used for custody transfer and inventory control applications with

NMi- and PTB-approvals. It meets the relevant requirements according to OIML R85 and

API 3.1B. The NMR84 free space radar with drip-off planar antenna is specifically suited

for stilling well applications. The superior drip-off antenna design with proven track

record eliminates problems caused by condensation.

Micropilot NMR84 is available with Modbus RS485 and Sakura V1 output.

For more information see TI01253G/00/EN.

• Proservo NMS8x

The intelligent tank gauge Proservo NMS80 is designed for high accuracy liquid level

measurement in custody transfer and inventory control applications with NMi- and PTB-

approvals. It meets the relevant requirements according to OIML R85 and API 3.1B. It

fulfills the exact demands of tank inventory management and loss control and is optimized

in regards of total cost saving and safe operation.

Proservo NMS8x is available with Modbus RS485 and Sakura V1 output.

For more information see TI01248G/00/EN, TI01249G/00/EN or TI01250G/00/EN.

• Tank Side Monitor NRF8x

The Tank Side Monitor NRF81 is a sensor integration and monitoring unit for bulk storage

tank gauging applications. It integrates various level, temperature and pressure tank

sensor data into a control host system. Various selectable alarms and outputs.

Tank Side Monitor NRF8x is available with Modbus RS485 and Sakura V1 output.

For more information see TI01251G/00/EN.

• Proservo NMS5/7

The Proservo NMS5/7 intelligent tank gauges are designed for high accuracy liquid level

measurement in storage and process applications. Tank mounted intelligence makes the

Proservo NMS5 ideal for single or multi-task installation, converting a wide of

measurement functions including beside others:

– Liquid level

– Interface level

– Spot density

– Density profile

Proservo NMS5/7 is beside others available with Modbus RTU RS485, Sakura V1,

Whessoe WM550 output. For more information see TI00452G/08/EN.

• Tank Side Monitor NRF590

Cross section (mm² (AWG))

Resistance (

/km)

Capacitance (nF/km)

Cable 1

0.5 (20)

39.2

Cable 2

0.75 (18)

24.6

Cable 3

1.3 (16)

14.2

Содержание NXA821













































































Результаты поиска

Содержание NXA821

Отзывы:

Endress+Hauser NXA821, Руководство по эксплуатации, Страница: 17 / 76

Результаты поиска

Содержание NXA821

Отзывы: