Endress+Hauser Levelflex M FMP40, Руководство по эксплуатации

Страница: 45 / 92

Levelflex M FMP40 with HART/4...20 mA Commissioning
Hauser 45
6 Commissioning
6.1 Function check
Make sure that all final checks have been completed before you start up your measuring point:
• Checklist "Post-installation check".
• Checklist "Post-connection check".
6.2 Switching on the measuring device
When the instrument is switched on for the first time, the following messages appear in a sequence
of 5 s on the display: software version, communication protocoll and language selection
⇒
Select the language
(this message appears the first time the device is
switched on)
⇓
Select the basic unit
(this message appears the first time the device is
switched on)
⇓
The current measured values PV (interface layer) and SV
(level) are displayed in the standard settings.
⇓
After
F
is pressed, you reach the group selection.
This selection enables you to perform the basic setup
E HAUSER
E
+ –